Federal Specification Tt S 00227E. Meets astm c920 type s, grade ns, class 35. Canadian food inspection agency acceptance.
Meets astm c920 type s, grade ns, class 35. Intended for horizontal joints with a minimum depth of 6 mm (1/4 in). Submerged conditions, such as canal and reservoir joints.
Ansi/Nsf Standard 61 Approved For Contact With Potable Water (Black, White, Colonial White, Aluminum Grey, Capital Tan, Limestone, Dark Bronze Colours Only).
Intended for horizontal joints with a minimum depth of 6 mm (1/4 in). Chemical cure allows the sealant to be placed in joints exceeding 1/2 inch (25.4 mm) in depth; Use t, nt, o, m, g, i.
Joint Design:good Joint Design In The
Placeable at temperatures as low as 40 °f. Meets astm c920 type s, grade ns, class 35. Although proglaze ii is not nsf registered, or previously authorized by usda, it does meet the requirements for use in federally inspected food processing facilities provided it is not used in areas
To Help You Understand The Language Of This Specification,
Product data sheet safety data sheet show all documents overview; Dynatrol® ii will withstand structural movement of 50% in extension and 50% in compression without adhesive or cohesive failure in properly designed joints. Capable of ± 25 % joint movement;
Welcome To Everyspec.com, Your Premiere Source For Free Downloads Of Government And Military Standards, Specifications, Handbooks, And Documents.
Packaging 5.7 l (1.5 us gal.) unit Adheres to most substrates commonly found in construction. Uses intended for use in all properly designed working joints with a minimum depth of 1/4 inch.
Submerged Conditions, Such As Canal And Reservoir Joints.
Meets astm c1382 when used in exterior insulation finish systems (eifs) joints. Remover, paint and lacquer, solvent type (11. Ministère des transports du québec acceptance.