Cable Route Marker Specification. 23g & 23m , dssb building jalan perdana 6/8 pandan perdana 55300, kuala lumpur malaysia. They can also be used to mark boundaries and other.
They come in two types, concrete and cement. 750mm height 75 mm thick with marking inscribed in english on one side and arabic on the other side. Get contact details and address | id:
Concrete Cable Marker Blocks Technical Specification.
Cable route marker plate with nuts & bolts. They can also be used to mark boundaries and other. The thickness of the plate should be 10 mm.
This Cable Route Marker Are Used To Indicate The Routing Path Of The Underground Cables.
Top plate is made of corrosion resistant copper alloy. Cables and harnesses shall be routed so that they are protected from abrasion, cold flow, cut through, vibration, chafing, flexing and sharp edges. The length and breath of the plate should be 130×100 mm.
1800 619 111 This Is The Phone Number Displayed On Victrack Route Marker Posts For Contact With Victrack For Information On Underground Communication Cables In The Victorian Rail Corridors.
13 august 2010 page 3 of 55 this document is uncontrolled when printed. Cable marker block part number: Electronic item, welding cable, lan.
Stainless Steel Direction Mark Will Be Fixed On One Side.
We are offering an extensive range of ht cable route marker. Get contact details and address | id: Get contact details and address | id:
23G & 23M , Dssb Building Jalan Perdana 6/8 Pandan Perdana 55300, Kuala Lumpur Malaysia.
Standard sizes available as shown below (please refer to the above images). The purpose of this specification is to detail the specific technical requirements of northern powergrid (the company) in relation to cable protection tiles, protection tape, cable ducting, route markers, and associated. For underground cabling, the spacing between cable numbers along the route should not exceed 5 m,.