Rt Duroid 5880 Specifications

By | January 7, 2022

Rt Duroid 5880 Specifications. To 2 oz./ft2 (8.5~70 î¼m) to meet most customeâ. Rt/duroid 5870 and 5880 laminates are easily cut, sheared and machined to shape.

Rogers RT/Duroid 5880 62mil 1.575mm High Frequency PCB for Commercial
Rogers RT/Duroid 5880 62mil 1.575mm High Frequency PCB for Commercial from www.rfpcb-board.com

Rt/duroid 5870 and 5880 laminates are easily cut, sheared and machined to shape. English french italian german spanish polish turkish arabic. Rt/duroid 5870 and 5880 laminates are easily cut, sheared and machined to shape.

The Dielectric Constant Of Rt/Duroid 5870 And 5880 Laminates Is Uniform From Panel To Panel And Is Constant Over A Wide Frequency Range.

They are resistant to all solvents and reagents, hot or cold, normally used in etching printed circuits or in plating edges and holes. The rt/duroid 5880lx material is a ptfe composite with glass reinforcement. Thick aluminum, brass, or copper plate on one side may be specified.

The Rogers 5880 Is Isotropic And Absorbs Low Moisture.

Low dissipation factor ranging from.0021 to.0027 at 10ghz; Normally supplied as a laminate with electrodeposited copper of ½ to 2 ounces/ ft.2 (8 to 70mm) or reverse treated edc on both. Rt/duroid 5870 laminates offer high frequency with low dielectric constant (dk).

Rogers Rt/Duroid 5880 High Frequency Material Is Glass Microfiber Reinforced Ptfe Composites Which Is Designed For Exacting Stripline And Microstrip Circuit Applications.

To 2 oz./ft2 (8.5~70 î¼m) to meet most customeâ. The dielectric constant of rt/duroid 5870 and 5880 laminates is uniform from panel to panel and is constant over a wide frequency range. (see reverse for product data) rt1.5880 data rogers corporation microwave materials division 100 s.

Also, When Comparing With Other Ptfe Laminates.

They are resistant to all solvents and reagents, hot or cold, normally used in etching printed circuits or in plating edges and holes. Rt/duroid 5870 and 5880 laminates are easily cut, sheared and machined to shape. Rogesr pcb rt/duroid 5880 (rogers 5880) material specification 1.

This Composite Laminate Has Excellent Chemical Resistance And Is Easily Cut, Unlike Other Materials.

Rt/duroid 5870 and 5880 laminates are easily cut, sheared and machined to shape. Rt/duroid 5870 and 5880 laminates are easily cut, sheared and machined to shape. Rogers rt/duroid 5880 20mil 0.508mm high frequency pcb for radar systems.

Leave a Reply

Your email address will not be published. Required fields are marked *