Anti Vortex Plate Specification. 188.8.131.52* the assembly shall consist of a horizontal steel plate that is at least twice the diameter of the outlet on a long radius elbow fitting, where. It prevents water vortexing on the suction and discharge side of a fountain system by slowing down the velocity and angles of water to allow for a manageable and adjustable flow.
Shall be cast bronze or stainless steel plate. 184.108.40.206* the assembly shall consist of a horizontal steel plate that is at least twice the diameter of the outlet on a long radius elbow fitting, where. All kits include below hardware:
Ancors,Washers,Nuts:stainless Steel 3/8 Ancors, Washers And Nuts.
Galvanised chequered plate, in 5 bar plate, plate thickness: Flow is based on the suction pipe velocity at 6 f.p.s. However, they should comply with 14.2.13.
The Assembly Shall Consist Of A Horizontal Steel Plate That Is At Least Twice The Diameter Of The Outlet On An Elbow Fitting.
Plate 319795014 04751029795014 4751029795014 9795014.
Halcyon assembly™ vortex inhibitors and anti vortex plates provide an engineered solution for architects, fire suppression engineers and designers, and clients that use a suction pump or quick outlet design within their liquid holding tanks. Can handle process temperature up to 450 °f (standard) and 650 °f (high temp) ggp our sensors never touch the process fluid. These plates are simple in design and very effectively control the velocity of the fluid thus preventing cavitation in the fluid.
Available With And Without Gasket.
Fire protection tanks has 3d. 147 opportunity road camdenton, mo 65020. All kits include below hardware:
Hardware Size Part # Pvc Plate 3 9 5/8 Avplate3Pvckit.
The vortex platedual sensor technology produces two independent vortex pressure over 1000 psig signals which allows for signal amplification and common mode noise reduction. (4) ss threaded rods (8) ss nuts (8) ss flat washers 2mm thick 1220 x 2440mm.