Al29-4C Specification

By | January 19, 2022

Al29-4C Specification. Model ci plus / ci 316 | heatfab residential and commercial hvac vents, flues, pipes and liners for stoves, chimneys, furnaces, and other applications. Failure to do so will void the certification and the warranty of the chimney system.

DuraVent FS45I Stainless Steel 4" Inner Diameter FasNSeal AL294C
DuraVent FS45I Stainless Steel 4" Inner Diameter FasNSeal AL294C from www.ventingpipe.com

Proper ¼” per foot pitch must be maintained at all times and condensate should flow back toward the appliance to the required number of drains. Ds 30° elbow with inside diameter 22” made of 316l. This resistance makes it an ideal choice for venting the corrosive condensation in high efficiency furnaces.

Figure 3 — Crevice Corrosion Test In 10% Ferric Chloride For 72 Hours.

Please just let us know what you inquire. Duravent firestop flat flashing for 3 inch fasnseal vent pipe from the fasnseal series. • recognized by the aga as the material of choice.

Model Ci Plus / Ci 316 | Heatfab Residential And Commercial Hvac Vents, Flues, Pipes And Liners For Stoves, Chimneys, Furnaces, And Other Applications.

This resistance makes it an ideal choice for venting the corrosive condensation in high efficiency furnaces. All inner seams shall be full penetration welded. Dsd wall support for 8” diameter chimney made of stainless 439.

Proper ¼” Per Foot Pitch Must Be Maintained At All Times And Condensate Should Flow Back Toward The Appliance To The Required Number Of Drains.

The riello is an excellent burner. For the most current genesis venting distances/information, consult the genesis product manual, available online at www.aosmithme.com. It has to be set up and dialed in by a tech with a combustion analyzer, as do all oil burners, but once you get it adjusted they need nothing other than normal maintenance.

Inner Shell Thickness Shall Be.035”(20Ga) For 5” To 48” Diameter Systems.

A specific vent adapter is required to transition from Available through exclusive representation only, please contact your commercial sales manager for more information. Riveted, tack or spot welded seams are not permitted.

Failure To Do So Will Void The Certification And The Warranty Of The Chimney System.

Vent shall be rated for an internal static pressure of 9” w.g. Ds 30° elbow with inside diameter 22” made of 316l.

Leave a Reply

Your email address will not be published. Required fields are marked *